|Why Use Pre-installation Blockout|
This type of installation requires the LS640-K pre-installation kit (order separately) which acts as a blockout, and is intended for installation before the luminaire. This method ensures the luminaire itself is not damaged during concreting or other site works, and also allows for all wiring to be completed prior to luminaire placement. Pre-installation also allows for off-site maintenance, via the detachable IP67 connector fitted on the luminaire housing. The mating connector on the cable has a sealing cap which ensures water does not enter the cable before the installation is completed. Pre-installation is required for all drive-over applications.
|Why Use Mounting Collars|
The LS640-2 mounting support installation in decks and grates. They may also be used in hollow floors where there is appropriate ventilation.
|Cable Entry Options for Pre-Installation Blockout|| ||Lens Options|| |
| ||IP68 Connector & Junction Box|
The luminaire is fitted with an IP68 connector, which attaches directly to the cable supplied with LS640-2 and LS640-K, without the use of any tools. The cable is 0.56 m in length, and is factory assembled with a 3 way junction box. Mounting collars may also use cable options for direct burial.
| || |
Glass of very high optical purity and load strength. Suitable for drive-over applications.
OptiClear™ glass with slip reduction glazing process. Suitable for drive-over applications.
|Cover Options for Pre-Installation Blockout|
|Flush covers for pre-installation use special seals and support bushes to ensure static loads up to 4200 kg are properly supported. In order to achieve this drive-over rating, OptiClear™ or GripGlass™ must be used.|
Pre-Installation Blockout Round Flush Cover
■ SS316: Polished
■ SS316: Brushed
| || || || |