LS363LED

Direct Burial

 

Why Use Direct Burial


Direct burial installation is ideal for landscaping areas or in locations where the depth is restricted. This type of installation also allows for maximum heat dissipation. The stainless steel construction of the luminaire performs flawlessly in alkaline and acidic soil types, as well as chemically fertilised landscapes.

 
 
Cable Entry Options for Direct Burial Lens Options 
Cable entry option for direct burial
Cable entry options for direct burial

Armoured Cable MC & Junction Box

Armoured cable 0.6 m provides protection against damage to cable between luminaire and 3 way junction box (included). Allows for loop in / loop out and flexibility of luminaire placement.

Not available for RGB option

Single Gland Entry, Anti-leach cable

MicroAntiLeach™ and 3 m cable provide additional protection to luminaire against water ingress via cable.
 
Glass lend

OptiClear™ Glass
Glass of very high
optical purity and load
strength. Suitable for
drive-over applications.

Glass lensGripGlass™
OptiClear™ glass with
slip reduction glazing
process. Suitable for
drive-over applications.
 
 

Cover Options for Direct Burial

Use recessed cover for installation in soil, grass, pavers and other uneven surfaces where no cover overhang is desired. Use flush covers for installation in fine finished surfaces such as granite and marble. They can also be used in some suspended applications (decks, etc). The flush cover will conceal gaps between the luminaire and the surrounding surface.
Cover options for direct burial Cover options for direct burial

Recessed Cover
SS316: Polished
SS316: Brushed

Round Flush Cover
SS316: Polished
SS316: Brushed

LS363 with recessed cover drawing LS363 with round flush cover drawing
 

Pre-Installation Blockout

 

Why Use Pre-installation Blockout


This type of installation requires the LS644-K pre-installation kit (order separately) which acts as a blockout, and is intended for installation before the luminaire. This method ensures the luminaire itself is not damaged during concreting or other site works, and also allows for all wiring to be completed prior to luminaire placement. Pre-installation also allows for off-site maintenance, via the detachable IP68 connector fitted on the luminaire housing.

The mating connector on the cable has a sealing cap which ensures water does not enter the cable before the installation is completed. Pre-installation is required for all drive-over applications.

 
 

Cable Entry Options for Pre-Installation Blockout

 

Lens Options

IP68 Connector & Junction Box

The luminaire is fitted with an IP68 connector, which attaches directly to the cable supplied with LS644-K-87-01 and the LS644-K-87-07, without the use of any tools. The cable is 0.56 m in length, and is factory assembled with a 3 way junction box.

Not available for RGB option

 
Glass lensOptiClear™ Glass
Glass of very high optical purity and load strength. Suitable for drive-over applications.
 
Glass lensGripGlass™
OptiClear™ glass with slip reduction glazing process. Suitable for drive-over applications.
 
 

Cover Options for Pre-Installation Blockout

Flush covers for pre-installation use special seals and support bushes to ensure static loads up to 1800 kg are properly supported.

In order to achieve this drive-over rating, OptiClear™ or GripGlass™ must be used.

LS363LED pre-installation cover

Pre-Installation Blockout Round
Flush Cover

SS316: Polished
SS316: Brushed

LS363 LS644-K pre-installation kit drawing with round flush cover